EstimatedEst. Read Time: 16 minutes
how to do barbell rows

WHICH BARBELL BENT-OVER ROW IS BEST?

Today we’re going to talk all about one of my favorite movements for the back muscles: the standing Bent-Over Barbell Row.

You know which row variation I’m talking about right?

That’s a trick question, and the point of this article.

There are a lot of different ways that people try to teach you how to do this foundational exercise.

But I don’t think there’s a one-size-fits-all row. If you want to find the row with barbell that is ideal for you, it starts with your current fitness and flexibility level as well as your training goals.

Today, I’ll be covering the common bent-over row mistakes and no-nonsense approach to determining where you should be starting with a Barbell Row. I’ll also talk about how you can get the most benefit out of it for what you’re trying to achieve in your upper body.

bent over row correct form

ANATOMY OF THE BACK

Before I jump into how to do classic Barbell Rows, let’s break down the anatomy of the back muscles so you understand exactly which target muscles we’re trying to hit.

  1. Latissimus dorsi
  2. Trapezius
  3. Lower back / erector spinae
  4. Rotator cuff
  5. Teres major

THE LATS (LATISSIMUS DORSI)

Play Button
lat muscles latissimus dorsi

The biggest major muscles of the back, the lat muscles are targeted by vertical pulling exercises like the Pull-up, Lat Pulldown, and the normal Bent-Over Row. When building muscle to make it look like you have a bigger back, these are the primary muscles to target.

TRAPEZIUS AND RHOMBOIDS

Play Button
upper and lower traps

They might not be the largest upper back muscles, but the middle trapezius muscles and rhomboids are essential for proper posture, shoulder joint function, and overall shoulder health benefits.

LOWER BACK / ERECTOR SPINAE

Play Button
lower back erector spinae

The low back is a crucial link to our entire kinetic chain and torso. If it gets hurt, you’ll be taken out of commission, and you won’t be able to lift weights for a while.

ROTATOR CUFF

Play Button
rotator cuff

Located right next to the rear delts, the rotator cuff muscles play a major support role in back exercises.

TERES MAJOR

Play Button
teres major

The Teres Major might be a small muscle but it’s important for all pulling exercises.

 
 

THE PENDLAY BARBELL ROW: NOT A UNIVERSAL EXERCISE

Let’s focus on the Bent-Over Row exercise that most people are learning in their strength training programs, the Pendlay Row.

Named after the person who invented it, Glenn Pendlay, this compound exercise has a starting position from the floor instead of a rack. This one distinction changes the entire technique of the bent-over row.

As a side note, the Glenn Pendlay Row is NOT the same thing as the Dorian Yates Row. These are two completely different style of rows.

This compound exercise has a starting position from the floor instead of a rack. This one distinction changes the entire technique of the row.

When you perform a Pendlay Row, you’re told to get all the way to the point where your back is horizontal to the floor.

Now, while there’s plenty of benefit to this version of the bent-over row, it’s here that the first problem comes in and kicks off our list of common starting position mistakes.

HIPS COMPROMISE FORM

A lot of people don’t have the ability to get in this hinged position during Barbell Rows either because of tight hips or an injury or surgery from years ago.

If you have tight hamstrings, you’re going to run into the problem where you will compromise your form. For example, as you come down to the floor into the common starting position of the Pendlay Row, you might be able to maintain a natural arch in your low back, which is what you want. However, if your hamstrings no longer have any flexibility left in them, your hips have to curl under in order to keep getting down to the bar.

Essentially, you won’t be able to keep going with proper form in this bent-over position because your hamstrings are blocking you.

Play Button
How To Do Barbell Rows

Continuing with that example, if you curl your hips under, you might be able to get down, but you’ll also have a flexed spine. If you are using heavy weight plates, you’re asking for trouble. Even lighter weights are going to be problematic during this full-body compound movement.

ROW LIKE YOU DEADLIFT

But this is where the bad form gets even worse.

With the Pendlay Row, you’re usually using a row technique that goes higher than your standard Barbell Row. When you row higher, the bar and the load start to travel a little further away from your body.

In order to lift the weight, you’ll start in a bent-over position and you’ll move into one of these compromised positions where the barbell with plates is out and away from your body, take an overhand grip (pronated grip), and then you’ll explosively pull up. Making this an explosive exercise will take your muscle contractions to the next level.

Play Button
pendlay row

The distance of the bar and the range of motion is terrible when you consider that your lower back is not in the optimal position. What’s more, it makes scapular retraction impossible.

Think of it this way: Nobody would ever advise you to load up the bar, get into a deadlift position with the barbell away from your body, then explosively stand up. So, why would you do it during an overhand Barbell Row?

That brings us back to the original point: where is your back in relation to the floor? Are you physically able to get all the way down into a horizontal position and maintain this exact position while explosively pulling?

I’m going to argue that most of you are not ready for this type of Barbell Row.

WHAT’S THE RIGHT ROW FOR YOU?

What is the main goal that you’re trying to accomplish with this fundamental exercise?

If you’re trying to be explosive, powerful and athletic, then naturally you’ll feel like you should be doing the Pendlay Row.

If you want bigger lats and better grip strength, you can make this into a great lat exercise by  performing the stricter version of Barbell Bent-Over Rows. These bodybuilding-style Barbell Rows are done with a range of motion targeting the muscle activation for lat hypertrophy.

But I want to make sure that you’re covering all bases with strong posture. I’m going to show you a version of the Barbell Row that’s even better than the Pendlay Row for athletic gains without the risk of injury over time, especially a lower-back injury, disc injuries or biceps injuries.

You’ll also naturally see some muscle growth with this Pendlay substitute.

 
 

HOW TO DO BARBELL ROWS: THE PENDLAY SUBSITUTE

From the top down, I’m going to cover a much better and safer Barbell Row for you to get started with.

If your ultimate goal is to row explosively, don’t worry, I’ve got you covered. Sometimes we need to take a few steps back in our routine in order to get ahead. This is an excellent exercise, but for now, skip the heavy barbell plates and let’s bring it back to the basics and get that body awareness.

THE SET-UP

The bent-over row starts with a proper stance. To get into Barbell Row form, you’ll want to start with both the bar and your stance inside of a rack, standing with feet shoulder width apart, head inline with the spine. If you don’t have a rack, that’s okay. Try to set a flat bench next to another flat bench. It’ll provide a similar height and allow you to engage the same proper rowing form to do this fundamental movement correctly.

Assuming you do have a rack, get inside and set it up so that the rack bars are just below knee height.

Play Button
How To Do Barbell Rows

The aim is to set yourself up in a stance and position where your rigid torso is in a bent-forward position and you’re engaging those core muscles for spinal stability.

Keeping the upright torso and core tight throughout this functional exercise will support your perfect form, but it’ll also help you build a stronger core.

You don’t want to go all the way down because your hamstrings probably won’t be ready for angles like that. You also want the bar to stay close to you during the entire exercise.

GRIP WIDTH

Now, as far as grip widths and where you want your hands to go on the bar, aim for the beginning parts of the knurling, approximately a shoulder wide grip. This is basically just a neutral grip outside your knees.

It’s important that you start and get used to a traditional overhand grip. Maybe down the line, you can use a mixed grip or narrow grip, but as you learn this version of the Bent-Over Barbell Row, I want you using an overhand grip.

HOW TO PULL

When you pull, you want to be in a correct position that allows you to get your elbows behind torso maximally.

If you pull to the waist, you won’t be able to get your elbows that far beyond your body.

Instead, if you pull to the top row of your abs, you’ll get your arms much further behind your body.

Play Button
barbell row how to pull

Try this a few times as a warm-up, and you’ll see that you will get a lot more extension of the arms behind the body, which is the function of the lats.

You don’t want to let your arms and elbows flare because you’ll lose the adduction of the lats. Again, this is what you’re trying to target.

You want to make sure the elbows can stay tucked. That’s why you are lifting with the narrower grip and pulling in tight. Do not pull high and let the elbows drift.

SCREW IN YOUR LATS

Another cue I like to give people is, when you’re pulling the bar imagine that you’re trying to break it.

Play Button
barbell row screw in the lats

You’re trying to break the bar in half and as you do this, you are essentially “screw in” your lats and shoulder blades into proper position.

Obviously, you’re not going to break the bar, as hard as you try, but you will see and feel how much more activation of the lats you’ll get. This type of contraction is one you won’t get with the explosive version of the bent-over row.

Play Button
How To Do Barbell Rows

And most importantly, with the barbell being much closer to your body and shoulder blades flat, your back is not being forced into an awkward position it cannot get into. That means, you’ve turned this lift into a much safer version of the Barbell Row.

TAKE YOUR BICEPS OUT

When you’re at the bottom of the row, people have a tendency to pull too much from the biceps muscles.

If you want to see how ineffective the bicep is in this position, all you have to do is turn your arm down and flex.

You’ll see a huge difference from an underhand grip flex. Despite how hard you’re flexing, there’s not that much tension with an underhand grip. But as soon as you flip the bicep up, you can feel a lot more tension in that bicep.

In this case, the bicep is a weak link, costing you your opportunity to lift more weight on this effective exercise.

So, what I’m saying is, try to turn it off before you pull.

I still want you practicing with light weights but once you master the proper form, you’ll be able to safely move from light weights up to heavier weights.

To do that with consistent form, focus on the triceps. At the bottom of every rep, contract your tricep muscles and this will reciprocally turn off the bicep. From here, when you initiate the pull, it’s happening from the lats as opposed to the bicep trying to initiate the move.

Play Button
How To Do Barbell Rows

Make sure that when you do this, you are just off the rack. You want to make sure the triceps have an opportunity to contract, but they won’t do that if the bar is on the rack.

EXPLOSIVELY PULL WITH A DEAD ROW

Finally, if we’re talking about rowing explosively, I’d recommend the Barbell Dead Row instead of the Pendlay Row.

Unlike what you’re taught with the Pendlay Row, I don’t believe that you should try to turn the legs off. What you should try to do instead is let them work to help with the pull.

Play Button
barbell row pull with dead row

Take the bar, bring it closer, and then try to sit your hips down and back. This makes this foundational movement safer since it took the demands off the low back and hamstrings.

From here, row to the knees. When you get to the knees, this is your chance to explosively row up to the belly button. Be sure to maintain a slight bend in the knees and keep your upper torso stable and use your core strength during the entire movement as you return to the original position.

This is a much more explosive version of the Bent-Over Barbell Row that also lets the entire body work the way it’s supposed to. What’s more, you’re building strength, explosiveness, and power.

When it comes to the Pendlay Row and the Barbell Row in general, don’t do what people are showing you just because they say, “This is how it’s done.”

The truth of it is, the Pendlay Row may not be how YOU are supposed to do it. If you’re limited in your mobility, I promise there’s a better way to row.

All I care about is you getting muscle definition out of this fundamental rowing movement, without getting anything out of it that you don’t want. In other words, all gains, and no injuries for beginner lifters all the way up to advanced lifters.

If you’re looking for a weight training program that will help you progress your strength and build lean muscle, you’ve come to the right place.  Check out the links below to see which of our ATHLEAN-X programs best fits your goals and fitness level.

 
 
athleanx
THE HIGHLIGHT REEL:
HOW TO DO BARBELL ROWS

  1. The barbell row is one of the most performed back exercises. It is also one of the heavy back exercises that gets performed incorrectly the most.
  2. Each body type is different, and every person has different sorts of muscle tightness and imbalances. This makes one version of an exercise ideal and one problematic.
  3. The most popular advice on how to do a barbell row says that you should have your back parallel to the floor, starting with the barbell on the ground, then explosively lift up. This is called the Pendlay Row, and most body types cannot perform it correctly.
  4. I recommend the Barbell Dead Row. This exercise keeps the explosiveness of the movement while improving your safety.
  5. Set up in a squat rack, placing the barbell on the bumpers at just below knee level. Bend at the hips, but only lean forward into a 45-degree angle. Focus on squeezing the bar and lifting it to your upper abs while keeping your elbows angled down towards your sides.
  6. Contract the triceps at the bottom of every rep to silence the biceps and help to keep them from attempting to dominate the row instead of your lats.
  7. If your only goal is muscle growth in your lats, then you should opt to stay more vertical than the traditional Pendlay Row. If you wish to gain explosive athleticism and build ground-up strength, then opt for the Barbell Dead Rows instead.

BARBELL ROWS FAQ

Bent-over row benefits include being one of the best barbell exercises to help create muscle growth in the muscles of the back including the latissimus dorsi, trapezius, lower back/erector spinae and the teres major, as well as the rotator cuff. Bent-over row benefits also include promoting spine stability, improved posture in your daily movements and improving your hip hinge. Be sure to maintain trunk stability and hip stability during the exercise.

The Barbell Row is worth doing if you choose the correct variation to reduce possibility of injury. Instead of the Glenn Pendlay Row form (the choice of some advanced lifters) , try a safer Barbell Row starting with the bar place on a low rack so that you aren't picking it up from the floor, leaning forward into a 45-degree angle and not further and rowing the bar to your upper abs while engaging the triceps. Done correctly, the barbell row is excellent for muscle gain and building muscle strength.

The Barbell Row is a great exercise for building back strength and muscle mass as well as improving your posture. However, it's important to choose the right variation to avoid risk of injury. Bent-over row benefits include elimination of muscle imbalances and muscle development in the lat muscles (latisimus dorsi), forearm muscles, glute muscles, low back and more.

The safest way to perform Barbell Rows is starting with the bar placed on a low rack so that you aren't picking it up from the floor. Lean into a flexed-forward position bending at the hips into a 45-degree angle (not a horizontal torso) with knees slightly bent. Rowing the bar to your upper abs while engaging the triceps.

If you are doing Barbell Rows properly, they should not engage the biceps. Instead of pulling from the bicep you'll want to focus on using the back muscles (the correct muscles to target in this exercise) and contracting the triceps when pulling, to turn off the bicep muscles. Barbell rows are better known as a great muscle builder for the back.

Jeff Cavaliere Headshot

Jeff Cavaliere M.S.P.T, CSCS

Jeff Cavaliere is a Physical Therapist, Strength Coach and creator of the ATHLEAN-X Training Programs and ATHLEAN-Rx Supplements. He has a Masters in Physical Therapy (MSPT) and has worked as Head Physical Therapist for the New York Mets, as well as training many elite professional athletes in Major League Baseball, NFL, MMA and professional wrestling. His programs produce “next level” achievements in muscle size, strength and performance for professional athletes and anyone looking to build a muscular athletic physique.

Read more about Jeff Cavaliere by clicking here

Popular & Trending
stop doing face pulls like this facepull mistake
1
How To Do Face Pulls
By Jeff Cavaliere MSPT, CSCS
September 9th, 2019
Face pulls are one of the best corrective exercises to help offset poor posture and shoulder dysfunction.  They help strengthen the chronically weak...
Body Fat Percentage Men
2
Body Fat Percentage Men
By Jeff Cavaliere MSPT, CSCS
July 11th, 2023
There are many ways to measure body fat percentage; some wildly expensive and most inaccurate. It's time to give you an alternative method that...
2 reasons your biceps aren't growing and 3 ways to fix it
3
Why Your Biceps Aren’t Growing
By Jeff Cavaliere MSPT, CSCS
August 22nd, 2019
Have you ever felt that no matter how much you trained your biceps you’re left saying… “My Biceps STILL Aren’t Growing?” I believe I know...
The Perfect Abs Workout
4
The Perfect Abs Workout
By Jeff Cavaliere MSPT, CSCS
July 31st, 2019
We’ll be following my ‘Six Pack Progression’ sequence as we choose each of the beginner and advanced ab exercises for each abdominal movement...
incline bench press avoid mistakes for upper chest
5
How To Incline Bench Press Correctly
By Jeff Cavaliere MSPT, CSCS
January 16th, 2024
The Incline Bench Press is one of the best upper chest exercises there is, but there's one major problem preventing us from getting the maximum...
best dumbbell exercises for chest
6
The Best Dumbbell Exercises for Chest
By Jeff Cavaliere MSPT, CSCS
November 6th, 2023
Today I’m going to share my favorite chest exercises… but there’s a catch. We can only use dumbbells! I’ll show you what to do whether you...
long head triceps exercises
7
Long Head Tricep Exercises
By Jeff Cavaliere MSPT, CSCS
December 19th, 2023
The triceps make up two-thirds of the size of your arm so the bigger your triceps, the bigger your arm muscles. But not all muscle heads of the...
cable chest workout
8
Cable Chest Workout
By Jeff Cavaliere MSPT, CSCS
November 2nd, 2023
Today, we're diving deep into the most underrated piece of equipment in your workout arsenal for chest workouts – the cable machine. The constant...
Cable Back Workouts
9
Cable Back Workouts
By Jeff Cavaliere MSPT, CSCS
December 12th, 2023
If you want a versatile back workout that hits every angle, challenges muscle recruitment patterns, and provides consistent tension, then you can’t...
cable shoulder exerciees
10
Cable Shoulder Exercises
By Jeff Cavaliere MSPT, CSCS
November 30th, 2023
Unlike barbell or dumbbell shoulder workouts, cables offer consistent tension throughout the exercise, a key factor that can lead to better...
Watch the YouTube version of this article